Upgrade your Niche Zero grinder with a wooden bellows lid designed for a smoother single-dose workflow. The flexible silicone bellows helps clear retained coffee grounds after grinding, while the removable wooden top lets you add beans without lifting off the entire assembly.
Key Features
- Zero retained grounds: press the flexible bellows after grinding to purge the residual coffee, so practically nothing is left in the grinder.
- Removable top for bean loading: lift off the wooden upper lid when adding a fresh dose.
- Wood-and-silicone construction: wooden components are sanded and finished with wax oil, paired with a flexible silicone bellows.
- Made for Niche Zero: select the Niche Zero version rather than the separately sold Niche Duo accessory.
Choose Your Version
- White Oak with Logo: complete bellows lid set with a logo, silicone bellows and matching bypass component. The oak is selected to coordinate with the stock wood.
- White Oak Plain: complete bellows lid set without the logo, including the silicone bellows and matching bypass component.
- Custom Wood: complete set using a wood species from the picture-based selector on this page. For special woods not shown, contact us before ordering to confirm availability and lead time.
- Bypass Tool Only (Replacement): one small 3D-printed replacement bypass component only. Wooden lids and silicone bellows are not included in this option.
Bypass Tool Color: Black or White
This selection changes only the color of the small 3D-printed bypass part. It does not change the wooden lid, wood species or silicone bellows color.
Compatibility, Care & Safety
Designed for Niche Zero grinders. Natural wood grain and color vary. The grinder itself is not included.
Fit by Grinder
| Grinder | Fits? |
|---|---|
| Niche Zero | Yes |
| Niche Duo | No. Use our separate Niche Duo bellows lid |
| Other grinders (for example DF64 or Lagom) | No. This lid is made only for the Niche Zero |
Quick Installation — About 1 Minute
- Remove the original lid: Switch off and unplug your Niche Zero. Loosen the screw holding the original plastic lid, then lift the lid off.
- Install the bypass tool: Put the supplied bypass tool in place and secure it using the original screw.
- Fit the bellows: Simply place the wooden bellows lid assembly on top of the grinder. You're ready to go.
No need to open the grinder body or access the burrs. Step 3 applies to complete bellows lid sets; the "Bypass Tool Only" variant is a replacement part and does not include a bellows lid.
Note: The bypass tool changes the original lid-switch function. Keep fingers and objects out of the grinder opening while it is running.
For special wood requests or fit questions, please send us a message or email us at service@coweetwares.com. Looking for a Niche Duo version? See our Niche Duo bellows lid.
FAQ
Is the grinder included?
No. This is an accessory only.
Do I need the small bypass part?
Yes. It takes over the lid-switch function of the original plastic lid. Without it the grinder will not start, so keep it in place. If you lose it, order the “Bypass Tool Only” option.
Does the bellows remove the retained grounds?
Yes. Press the bellows after grinding and the residual coffee is purged, so practically no grounds stay in the grinder.
Do I need to open the grinder?
No. Installation takes about a minute and does not involve the burrs or the grinder body.




















